WARD MFG 1B.BMT 16647716

Ward class 150 malleable iron fittings are made with the most sophisticated metallurgical and processing controls available. Iron samples are continuously analyzed using spectroscopy to conform the material quality. This sophisticated chemical analysis is complemented by rigorous quality control of incoming raw materials and iron processing. The final casting produced by this detailed attention to quality is a close grained, high strength, non-porous iron. Quality iron is the starting point for ward fittings. From this iron, accurate threads are machined that comply with the precise standards developed by the American society of mechanical engineers (ASME) and published as an American national Standard. The threads have an accurate form, thread length and straightness to allow them to easily engage threaded pipe. In addition, ward fittings have a chamfered opening to allow faster and easier pipe engagement. This feature also protects the fitting threads from damage during handling. All ward black and galvanized class 150 malleable iron fittings having outlets ranging from 1/2 through 4 in are air tested at 80 psig. This test is part of a constant program to maintain the highest quality fittings available.

WARD MFG Pipe Tee, Tee Fitting, 1-1/4 in Connection Size 1, FNPT Connection Type 1, 1-1/4 in Connection Size 2, FNPT Connection Type 2, FNPT Connection Type 3, FNPT|FNPT|FNPT Connection, Iron, Malleable Iron Material Construction, Black, 150 lb Pressure Class, 300 psi, 2.15 in Dia, -20 to 150 deg F, Domestic

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/WARD_MFG_1XE_BB_Catalog.pdf