WARD MFG 1XE.BB 10239777

Ward class 150 malleable iron fittings are made with the most sophisticated metallurgical and processing controls available. Iron samples are continuously analyzed using spectroscopy to conform the material quality. This sophisticated chemical analysis is complemented by rigorous quality control of incoming raw materials and iron processing. The final casting produced by this detailed attention to quality is a close grained, high strength, non-porous iron. Quality iron is the starting point for ward fittings. From this iron, accurate threads are machined that comply with the precise standards developed by the American society of mechanical engineers (ASME) and published as an American national Standard. The threads have an accurate form, thread length and straightness to allow them to easily engage threaded pipe. In addition, ward fittings have a chamfered opening to allow faster and easier pipe engagement. This feature also protects the fitting threads from damage during handling. All ward black and galvanized class 150 malleable iron fittings having outlets ranging from 1/2 through 4 in are air tested at 80 psig. This test is part of a constant program to maintain the highest quality fittings available.

WARD MFG Bushing, Bushing Fitting, 1 in Connection Size 1, FNPT Connection Type 1, 3/4 in Connection Size 2, MNPT Connection Type 2, FNPT|MNPT Connection, Iron, Malleable Iron Material Construction, Black, 3/4 x 1/2 in Thread, 0.25 in H x 1.42 in W Hex, 150 lb Pressure Class, 300 psi, -20 to 150 deg F, Domestic

Outside hex head, reducing-type, malleable iron material, 1 x 3/4 in size, black finish, ASME B16.3, ANSI/ASME B1.20.1/B16.14, UL, ULC, FM, NSF 61/61G applicable standard, ASTM A197/A153/b633 material specification, class 150 pressure rating

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Ward_Mfg_1XA_BB_Catalog.pdf